Option iCON 431 3G modem Supported ?

stmx38 · December 5, 2009, 3:24pm

I have attached my modem to RB but i can’t see USB port under port menu.

[admin@MikroTik] > system resource usb print 
 # DEVICE VENDOR                   NAME                  SPEED                 
 0 2:1                             RB400 EHCI            480 Mbps              
 1 1:1                             RB400 OHCI            12 Mbps               
 2 2:3    Option N.V.              Globetrotter HSUPA... 480 Mbps              
[admin@MikroTik] > port print    
Flags: I - inactive 
 #   NAME                      CHANNELS   USED-BY                     BAUD-RATE
 0   serial0                   1          Serial Console              auto     
[admin@MikroTik] >

ROS 4.2

sergejs · December 7, 2009, 11:59am

Install MikroTik RouterOS 4.3 version, contact support (support@mikrotik.com) with attached support-output file.

stmx38 · December 7, 2009, 1:09pm

sergejs
can you provide me link to instruction how to make support-output file ?
thanks

normis · December 7, 2009, 1:39pm

/system sup-output

then download the file from the router file list with FTP or Winbox.

stmx38 · December 8, 2009, 7:20pm

normis thanks.
sent

stmx38 · December 29, 2009, 9:27pm

sergejs
Thank you very much for adding support of my modem !
ROS v4.4

[admin@MikroTik] > /system resource usb print

DEVICE VENDOR NAME SPEED

0 2:1 RB400 EHCI 480 Mbps
1 2:3 Option N.V. Option Configuration 480 Mbps
2 1:1 RB400 OHCI 12 Mbps

[admin@MikroTik] > /port print
Flags: I - inactive

NAME CHANNELS USED-BY BAUD-RATE

0 serial0 1 auto
1 usb5 3 9600

[admin@MikroTik] > interface ppp-client print brief
Flags: X - disabled, R - running

NAME MAX-MTU MAX-MRU PORT PROFILE

0 R ppp-out-Moldcell 1500 1500 usb5 default

[admin@MikroTik] > interface ppp-client print
append brief count-only detail file follow follow-only from interval where without-paging
[admin@MikroTik] > interface ppp-client print detail
Flags: X - disabled, R - running
0 R name=“ppp-out-Moldcell” max-mtu=1500 max-mru=1500 mrru=disabled port=usb5 data-channel=2 info-channel=2 apn=“internet”
pin=“” user=“” password=“” profile=default phone=“” dial-command=“ATDT” modem-init=“” null-modem=no
dial-on-demand=yes add-default-route=yes use-peer-dns=yes allow=pap,chap,mschap1,mschap2

[admin@MikroTik] > ip address print
Flags: X - disabled, I - invalid, D - dynamic

ADDRESS NETWORK BROADCAST INTERFACE

0 D 94.139.xxx.xxx/32 10.112.112.126 0.0.0.0 ppp-out-Moldcell