Hello.
Since we change to 6.29.1
I’m seeing constant messages like this:.
11:53:29 route,ospf,info Database Description packet has init bit set in middle of an exchange
11:53:29 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to 2-Way
11:54:29 route,ospf,info Database Description packet has init bit set in middle of an exchange
11:54:29 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to 2-Way
11:55:19 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
11:57:49 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
11:57:49 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
11:57:50 route,ospf,info Ignoring Link State Acknowledgment packet: wrong peer state
11:57:50 route,ospf,info state=Init
11:57:50 route,ospf,info Ignoring Link State Acknowledgment packet: wrong peer state
11:57:50 route,ospf,info state=Init
11:57:50 route,ospf,info Ignoring Link State Acknowledgment packet: wrong peer state
11:57:50 route,ospf,info state=Init
11:59:29 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
12:00:39 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
12:04:09 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
12:05:29 route,ospf,info Database Description packet has init bit set in middle of an exchange
12:05:29 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to 2-Way
12:06:19 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
12:14:19 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
12:23:09 route,ospf,info OSPFv2 neighbor 10.0.0.2: state change from Full to Init
interface=ether2 - OSCURO cost=10 priority=1 authentication=none authentication-key=“” authentication-key-id=1 network-type=broadcast instance-id=0
retransmit-interval=5s transmit-delay=1s hello-interval=10s dead-interval=40s use-bfd=no
Can you guys help me way this is happening? thank you