I have 2 DSL connections to the same ISP that connect to the same LNS. The MK is doing the PPPOE connections ( modems are bridged). I am using ECMP to try and balance the outbound load( doesn’t work) between the two PPPOE connections and OSPF to load balance the incoming connects ( works)
I am not using NAT,and the LAN has /27.
The problem is that the outbound connection only use one PPPOE tunnel connection and doesn’t load balance between the both. The only thing that i can see wrong it that the next hop 119.161.92.17 ( the LNS ) has a preferring one interface but the default route is using both interfaces
Here is the routing table
ip route print
DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 175.45.68.65 Bond-1-ppp 1
Bond-2-ppp
1 ADC 10.0.0.0/24 10.0.0.199 bond1 0
2 ADC 10.0.1.0/24 10.0.1.200 bond2 0
3 ADC 119.161.92.17/32 175.45.65.88 Bond-1-ppp 0
Bond-2-ppp
4 ADC 175.45.68.64/27 175.45.68.65 ether6 0
Anyone have any thoughts on what could be wrong
Cheers
Anthony
