Hello, I am now to RouterOS, i followed this article https://wiki.mikrotik.com/wiki/Manual:Wireless_VLAN_Trunk and after a successful connection between both aps the client traffic is still not reachable
I configured my router as follows:
Management vlan is vlan300
Main router ip: 172.16.30.1/24
ap IP: 172.16.30.2/24
client AP: 172.16.30.5/24
i allow created the vlan on the interface vlan and add the bridge port and vlans
Client vlan is vlan1000
client Ip: 172.16.35.0/30
I also configure the client ip on my main router and also setup NAT so he can reach the internet, but when i configure his ip on the router, trying to ping the default gateway on his router … the ping is not reachable, what could be the cause
Emmah
