Please help with 2 VPLS!!

RouterOS Wireless Networking
1

Hello Mikrotik guys!

I need some help with configuration 2 VPLS (each VPLS for wlans..)
I have 2 wlans (wlan1, wlan2) and I want to create 2 VPLS but only one VPLS is running..

I read in other post: http://forum.mikrotik.com/t/2x-parallel-vpls-tunnel-in-the-same-time/36306/1

“config set only lsr-id , dont set transport-address”

But this one not work in my configuration.

I’m using 4.11.


Please help me!

Thanks

2

Hi Dude..

you may can refer to http://forum.mikrotik.com/t/mpls-configuration-for-nv2-routeros-v5-0beta6/39935/1
but this is for the RouterOS 5.6Beta6.

you need to change the value of the “band” and delete “/interface wireless set wlan1 nv2-qos=default”, the rest remain the same..

It’s work in the 4.11, but remember that, have to use mac telnet to the equipment.

forgive me lazy to edit it…

p/s: This is for only 1 wlan card.

3

Thanks angboontiong!

But I need with 2 wlans..


wlan1 (VPLS1)<-----> (VPLS1) wlan1

wlan2 (VPLS2)<-----> (VPLS2) wlan2