Hi
Im trying to configure PLEX server for outside access.
Problem is that my ISP (SKY Broadband UK) does not allow to use own routers. I have configuret ISP Router with DMZ to my MikroTik router.
All services and portforwarding are working fine bar PLEX.
As usual i have forwarded the relewant port on mikrotik and im logging the access.
The line that pops in the log when im trying to enable Remote Access on PLEX is this.
Plex Server dstnat: in:Sky_Broadband out:(none), src-mac c0:3e:0f:1f:58:b8, proto TCP (SYN), 54.194.240.140:22092->192.168.0.254:29999, len 60
a bit about my network config
internet → Sky Router LAN IP 192.168.0.1 → DMZ to mikrotik
192.168.0.254(WAN SKY_Broadband) - Mikrotik - 192.168.1.1(LAN)
192.168.1.122 PLEX Server
Quastion is why the log points to mikrotik WAN interface?
Best Regards
Matt