Dear folks
I’ve noticed a problem when using a Powerbeam M5 400 in conjunction with a Mikrotik HeX PoE Lite.
Basic info:
PSU = 24v DC supply
Mikrotik PoE Hex Lite: 6.36.2 (also tried 6.34.6) / firmware 3.33
PowerBeam M5 400 - Ver. 5.6.6(XW)
The PoE ports do not detect the PB M5 when the router PoE output is set to ‘auto on’. Mikrotik says ‘waiting for load’
If I set the PoE to ‘forced on’ then the Powerbeam runs ok.
Has anyone else seen this?