poe-out on ether5 of RB951Ui-2HnD does not work

RouterOS General
1

dear all,

just notify that my poe-out on ether5 of RB951Ui-2HnD does not work.

here are the system resource of my RB

> /system resource print
                   uptime: 6m20s
                  version: 5.26
              free-memory: 109868KiB
             total-memory: 127160KiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 4%
           free-hdd-space: 84072KiB
          total-hdd-space: 126976KiB
  write-sect-since-reboot: 498
         write-sect-total: 168410
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: RB951Ui-2HnD
                 platform: MikroTik
> /interface ethernet poe settings print
  version: 1.0
> /interface ethernet poe print

the device connected to ether5 is RB750, connected with straight cable and this unit still off

what could be wrong ?

Tq

P

2

hi there,

i just upgrade the OS of unit into v6.x and the poe-out of ether5 start to work.
my RB750 start to fired up after the RB951Ui-2HnD boot process complete.

can anyone reconfirm that the poe-out of RB951Ui-2Hnd only work on V6 ?

P