Point to Point - Cannot ping accross wireless

RouterOS Beginner Basics
1

I have two RB411U with UBNT 900mhz cards installed.
I have setup one as a station and the other as an ap-bridge.
I have setup a bridge on each RB between the eth interface and the wireless interface and given them the IP’s of 192.168.0.130 and 192.168.0.131.

I have ping accross the wireless with ARP but cannot ping standard.

What am I missing???

Thanks

2

How about the WDS part? That is what it appears to be by the rest of the setup. On both routers:

/interface wireless
set wlan1 wds-mode=dynamic wds-default-bridge=bridge1

If wlan1 and bridge1 are not correct, change it to the correct names.
And the ips should be assigned to the bridge on the ap and the station.