Point to Point link between Mikrotik to HP Procurve not working

RouterOS General
1

HI All,

Looking for some advice, we have had a new office installed and it is joined to our head office by a direct Fibre connection (BT ADVA at each site)

Mikrotik------->ADVA--------->ADVA-------> HP 5406zl

The remote site is to be run on a different subnet to the head office, so i have added a 172.16 vlan (VLAN10) in the middle, however I am unable to get the link to work the procurve can ping the mikrotik but the mikrotik cannot ping the procurve traffic stops at the vlan 10 on the procurve.

Is there something i am missing on the mikrotik config to allow this to work? I have attached both sets of config in case that helps.

Any help would be appreciated.

Many Thanks
Tim :confused:

2

I have actually managed to solve this, there was a line in the 5406 config “managemet-vlan 1” that was stopping the routing to other subnets. I can now ping in all directions and DHCP relay is also working