Port Forwarding Has Stopped Working

RouterOS Beginner Basics
1

I am pretty new to Mikrotik…I set up port forwarding following the instructions I’ve found in this forum. The port forwarding was working previously for all ports that I had opened. Now, though, it is only working for port 32400, I am lost as to why it stopped working on the others.

Here are my firewall rules, not sure if anything looks wrong there, I haven’t messed with it.

One thing to note, port 32400 which is working is going to IP 192.168.0.220, which is my Media PC that I use as a Plex server, all other IPs are for my main PC (also have port 9 open for both for WOL, but it’s not working on either). But when I check port 32400 on my main PC, it still says it’s open when I check using a port-checking website. I’ve tried checking this with-and-without the Windows firewall being on, with the same result…any help here would be greatly appreciated, I’m feeling lost!

Thanks.

2

Is your main pc using dhcp for automatic ip configuration? Could it be that it has a different ip now and the forward is happening to wrong ip?

3

I’ve set the IP as static in both the router and on the PC…I’ve also tried being static on the PC only, and the other way around, I have no idea what’s going on.

4

Hi
On the far right of the first screen-shot you have “Packets” column. Does the count increase when you try to connect to these services?

If yes:

  1. connection are coming in
    2 connections are being remapped
    Question:
  2. do they pass firewall? → verify counts on firewall? you could make explicit rules for these ports to count them or log all dst-nat-ed connections…
  3. is your windows allowing them? try connecting within your network to these ports to verify availability

If no:
is your isp blocing these ports?