Hello good day! I am new here and yeah I have a problem ^_^.
I have an RB1100 and configured as PPPoE Server with an IP of 192.168.10.1 and created a bridge named PPPoE-Server Bridge, the RB1100 is handing out 192.168.20.1-192.168.20.10 to its PPPoE client, and I am using a HapLite as a PPPoE Client with a DHCP enabled and giving out 192.168.21.2-192.168.21.254. Now my PC is connected to one of the PPPoE Client, the client with an IP of 192.168.20.1 and my IP from the HapLite is 192.168.21.3. The client is connected using an ubiquiti devices (PBE 5AC 620) with an IP of 192.168.10.251(AP) and 192.168.10.252 (Station). The problem is I cannot access the ubiquiti GUI from my PC. I did some port forwarding but still cannot access the GUI, where would I configure the port forwarding? I have done some port forwarding before and it is success but I am outside the firewall trying to access a certain pc on the inside, but I can’t think of how to do it when I am inside trying to access the IP on the same subnet with the PPPoE server. Hope someone can help me.