Hi all.
Suppose I have a CPE and an AP.
The AP have a bridge with only its wlan1, and an ip address and dhcp server linked to this bridge.
The AP give a dhcp address to the wlan1 of CPE.
The CPE have a dhcl-client in wlan1, and a manually added ip address in ether1.
My PC is connected to the CPE ether1.
When I scan from winbox, I can see only the ip address of the CPE wlan1 and the ip of the AP bridge: NOT THE IP ADDED TO THE ETHER1 CPE.
If I disconnect the wlans, the scan give only the cpe wlan1 ip address.
If I disconnect the wlans, and reboot the cpe now I can see the ip of ether1.
Is this normal ?
thanks