Hiya Guys…
Been battling with this one for a very long time!
Got various CCRs running through our Fibre & Wireless Network.
Also have a speedtest server hosted!
If I run a speed test from our office to our Main CAB (1016 here and speed test here) I get around 600mbps Up and down every time
If I run a speedtest to the web, I get between 100 and 500, but usually 150 down and 300 up. using various servers.
I have a 1 GIG bearer, handed over from Juniper router on copper, it goes through a copper to SFP module.
No errors showing.
I have just swapped the circuit, we were previosuly on a Mikrotik CCR1009 from our supplier and 1 for our own networking, thought this may be the issue, hence the ccr1016.
CPU is around 5%
Turned off all queuing, this router has around 50PPPOE sessions, rest our performed on other CCRs using OSPF to interlink. Firewalls to absolute minimum, around 10 or so, no mangle rules and Fastpath has been switched on and off.
OFFICE ---- CCR1009 ------ CCR1016 (WAN here) ----- CCR1009 ----- OUR OWN SPEEDTEST SERVER
So we have to pass through CCR1016, but it appears when we go via the WEB, it goes wrong…
Supplier has assured us that we have 990mbps and have shown evidence with a Mikrotik BW Test on old circuit.
Be greatful for ANY advice.