Greetings Friends.
I used to have a DSL Tplink router (for PPPoE connection). I replaced it with RB951Ui-2HnD
I’m stuck with making a simple PPPoE Client connection. Is it possible that my ISP is blocking cloned MAC (from Tplink).
Though The PPPoE Connection is established and able to ping the gateway from router.
I cannot ping 8.8.8.8 from router.
My configuration is listed below.
[admin@MikroTik] > ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade out-interface=pppoe-out1
[admin@MikroTik] >
[admin@MikroTik] > ip address print
Flags: X - disabled, I - invalid, D - dynamicADDRESS NETWORK INTERFACE
0 192.168.4.1/24 192.168.4.0 e4-LAN
1 D 182.50.xx.yy/32 182.50.67.xxx pppoe-out1
2 D 10.115.99.22/24 10.115.99.0 e3-DSL
[
admin@MikroTik] > ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibitDST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 ADS 0.0.0.0/0 10.115.99.1 0
1 DS 0.0.0.0/0 182.50.67.xxx 1
2 ADC 10.115.99.0/24 10.115.99.22 e3-DSL 0
3 ADC 182.50.67.xxx/32 182.50.xx.yy pppoe-out1 0
4 ADC 192.168.4.0/24 192.168.4.1 e4-LAN 0
[admin@MikroTik] > ping 182.50.67.xx
HOST SIZE TTL TIME STATUS
182.50.67.xxx 56 64 8ms
182.50.67.xxx 56 64 6ms
182.50.67.xxx 56 64 9ms
182.50.67.xxx 56 64 3ms
182.50.67.xxx 56 64 8ms
sent=5 received=5 packet-loss=0% min-rtt=3ms avg-rtt=6ms max-rtt=9ms
[admin@MikroTik] > ping 8.8.8.8
HOST SIZE TTL TIME STATUS
8.8.8.8 timeout
8.8.8.8 timeout
8.8.8.8 timeout
8.8.8.8 timeout
8.8.8.8 timeout
sent=5 received=0 packet-loss=100%
I would appreciate if some mikrotik gurus can pinpoint me out where i’m doing wrong or missing some settings.
Many Thanks