This is regarding to tread http://forum.mikrotik.com//viewtopic.php?t=6591
Mikrotik 2.9.12 and PPPoE
Awaited new version of Mikrotik does not solve our problem with PPPoE. As I wrote before, there was nonfunctional PPPoE in 2.9.+ version and we were promised problem solution in 2.9.12. I does not turn out well. We are using OvisLink WL-5460AP as client and router SMC7004VBR EU. Problem is still the same, in LCP timer timeout. In version 2.8.28 it is functional!! We can not upgrade nor make new APs therefore.
LOG:
echo: pppoe,debug,packet wlan1: rcvd PADR from 00:XX:XX:XX:XX:EB
echo: pppoe,debug,packet session-id=0x0000
echo: pppoe,debug,packet service-name=internetoxid
echo: pppoe,debug,packet relay-session-id=00 04 e2 e0 a2 b4
echo: pppoe,ppp,debug <0008>: PPP started
echo: pppoe,ppp,debug <0008>: PPP connected
echo: pppoe,ppp,debug <0008>: LCP lowerup
echo: pppoe,ppp,debug <0008>: LCP open
echo: pppoe,debug,packet wlan1: sent PADS to 00:XX:XX:XX:XX:EB
echo: pppoe,debug,packet session-id=0x0800
echo: pppoe,debug,packet relay-session-id=00 04 e2 e0 a2 b4
echo: pppoe,debug,packet service-name=internetoxid
echo: pppoe,ppp,debug <0008>: LCP timer
echo: pppoe,ppp,debug,packet <0008>: sent LCP ConfReq id=0x1
echo: pppoe,ppp,debug,packet <mru 1488>
echo: pppoe,ppp,debug,packet <magic 0x3b1b5bdd>
echo: pppoe,ppp,debug,packet
echo: pppoe,ppp,debug <0008>: LCP timer
echo: pppoe,ppp,debug <0008>: LCP timeout waiting initial data
echo: pppoe,ppp,debug <0008>: LCP lowerdown
echo: pppoe,debug,packet wlan1: sent PADT to 00:XX:XX:XX:XX:EB
echo: pppoe,debug,packet session-id=0x0800
echo: pppoe,ppp,debug <0008>: PPP disconnected
echo: pppoe,ppp,debug <0008>: PPP destroy
echo: pppoe,ppp,debug <0008>: PPP stopped
echo: pppoe,ppp,debug <0008>: CCP lowerdown
echo: pppoe,ppp,debug <0008>: CCP down event in initial state
echo: pppoe,ppp,debug <0008>: IPCP lowerdown
echo: pppoe,ppp,debug <0008>: IPCP down event in initial state