# PPPOE MTU ALWAYS DEFAULTS TO 1480 INSTEAD OF 1492

**URL:** <https://forum.mikrotik.com/t/pppoe-mtu-always-defaults-to-1480-instead-of-1492/181991>\
**Category:** Beginner Basics\
**Created:** [February 15, 2025, 2:21pm UTC](https://forum.mikrotik.com/t/pppoe-mtu-always-defaults-to-1480-instead-of-1492/181991 "2025-02-15T14:21:16Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![himurae](https://forum.mikrotik.com/letter_avatar/himurae/32/6_449c533f586939b6e5f246632a46421f.png) [@himurae](https://forum.mikrotik.com/u/himurae)\
**Post date:** [February 15, 2025, 2:21pm UTC](https://forum.mikrotik.com/t/pppoe-mtu-always-defaults-to-1480-instead-of-1492/181991/1 "2025-02-15T14:21:16Z")

</div>

hello people  
  
  
i have ros 17.7 x86 on a bare metal mini pc ,my issue is my isp provides mtu 1492 (i have tested on VYOS/OPNSENSE it is indeed this and it works without any issues )but on mk ros it always defaults to 1480 .  
I tried changing parent interface mtu to 1508/1504 also pppoe interface max mtu to 1492/1500 but actual mtu goes to 1492 after any change for 5 secs then reverts back to 1480.  
why this strange behavior

Edit I tested also on promomox CHR version results are absolutely the same after help from community i have been able to bump mtu to 1488 ,but still not 1492

---

_[View the full topic](https://forum.mikrotik.com/t/pppoe-mtu-always-defaults-to-1480-instead-of-1492/181991)._
