PPPoE ..... plese HELP

a-l-i-e-n · January 10, 2006, 6:09pm

Hello,

I wuld like to connect PPPoE (10.10.10.X) client to my local netvork (192.168.1.X). Now PPPoE server yust provides acces to the internet.
Is this possible?

tnx,
David

sten · January 11, 2006, 8:30am

Yes

a-l-i-e-n · January 11, 2006, 12:41pm

How??

cibernet · January 11, 2006, 1:52pm

Check the manual.. here: http://www.mikrotik.com/docs/ros/2.9/interface/pppoe

cmit · January 11, 2006, 2:04pm

Would you mind reading the manual and the how-tos first?
The whole setup is described there, and you won’t find someone here to re-type the manual for you or read it to you.

Not meant as an offense, but try to at least read the manual once before starting to ask “how can i”…

Best regards,
Christian Meis

a-l-i-e-n · January 11, 2006, 2:46pm

afcourse i’ve treied by the manual… that works yust for the internet …
I need to connect local network too

@cmit
No offense… How do you know I haven’t read the manual?!.. I did !! but I still need some help. So I’m asking for a litle help.

ofasa · January 11, 2006, 8:00pm

Yes, but you’ll need to give more information about your network layout.

cmarazzi · January 11, 2006, 9:30pm

Ofasa,

Is your local network 192.168.1.X on the same Mikrotik Router as the PPPoE server?

If it is, and your PPPoE clinet is able to connect to PPPoE server, but not access the 192.168.1.X, then you problably have a routing problem.

However if you would like your PPPoE client to get an IP from the 192.168.1.X then I think you would need to bridge the two interfaces together (PPPoE and ether?).