Help…
i have a CCR1016 for pppoe server …!
ether1 wan have 200Mb…!
ether2-11 pppoe server …
300 users active now but wan just send 97Mb data …
when wan come on 97Mb … stop …
not going more data
What makes you think your problem is in any way related to the PPPoE?
I’d go and check the link on your WAN interface first- it sounds like it’s negotiated speed is 100M.
wan is ok …
problem just for pppoe users
ether12 for dhcp … ! (for my office)
when speed test on dhcp show me 200Mb
Firmware version?
test on 6,37.1
6,38
3,38.2
but same issue
Look for dynamic Simple Queue entries for the PPPoE users. If they exist, for what speeds are they set?
Look at the IP fIrewall Mangle rules and make sure the MSS rules are dynamically inserted at the top, or very nearly, of the list.
I have some PPPoE clients but the fastest plan they can have is 100Mbps. I’m also only on 6.36.4 at this time.