PPPoE server with Ubiquiti stations

RouterOS General
1

Hello everybody,

I have a pc with RouterOS. I want to give internet to same friends using PPPoE server. I’m using NanostationM5 as AP WDS and want to use LocoM5 as Station WDS to my frineds.

I want to configure a PPPoE server on RouterOS and give to my friends an user/password.

I don’t know how to setup the server and the clients, I only know on LocoM5 I have to setup the user/password I create on the PPPoE server.

If anybody can help me or has a tutorial I’ll be happy :smiley:

Thanks in advanced

2

If you want the CPE (customer loco) to do the pppoe authentication, be sure to put the client in router mode, not bridged. You will have to have the clients NAT from here.

Here’s the pppoe wiki article http://wiki.mikrotik.com/wiki/PPPOE_Server

3

Thanks a lot, I’ll try it as soon as possible, my LocoM5 has die :frowning:

4

Is this config correct for server?

5

On station LocoM5 I have set on Network tab:

Router
PPPoE

user/password.

Do I have to enable NAT and DHCP? I would like my pc with RouterOS gives IP addresses to final clients.