can someone help me in installing RB433 v.6.0rc5 with external radius server.
the login requests from the clienta is not is not going to external radius server.
dont know why.
ashlee123 
- Update to v6.7. rc5 is really old.
- How is your /radius configured?
- Did you turn on AAA for PPP?
Dear,
what i am using mikrotik is as NASBOX
the conf of my network is
ISP with radius server ----------------------- NAS BOX---------------------Windows clients
what i want is
internet bandwidth is available on my nas box and i want that my client should be able to get authenticated by the external radius and should to abel to acces the internet according to the bandwidth police assigned at the external Radius
in mikrotik i have configured
ip address wan interface 116.68.246.122/29
default gateway 0.0.0.0/0 gateway 116.68.246.121
ip address of lan interface 172.13.0.1/24
ip pool
pppoe pool
172.13.0.1-172.13.0.250
PPP
ppp server add
ppp profile local addres wan ip (116.68.246.122) remote addres pppoe pool
ppp service enable PPP only interface lan (172.13.0.1)
in secret use radius and accounting is enabled.
now in the radius tab
ip address 116.68.246.29
secret (*******)
thats all i have done
now clients are getting authenticated from radius and i can see a route built whenever any client connects but he is unable to surf or ping any ip
plz help me
if u want u can login to the MT box with user id admin
password admin
thanks for ur help
ashlee
I looked at your device, and honestly, that config is a mess and there are many things wrong with it.
Saying that, test if it works not and CHANGE the password for the admin account.
You didnt have a NAT rule, so I fixed that, but I would REALLY recommend getting someone to configure the device correctly for you.
Or go and take Mikrotik training in your area.