PPTP - no traffic!

RouterOS General
1

Hi
I have problem to set up PPTP too VPN service.

VPN-service
I dont have controle over VPN service.
(it works when setting up a PPTP-client in winXP/Vista to this VPN service)
I connect to:
IP: DNS name, ip address could be different every time.
ex 1.1.1.1


I have two interfaces
Router

  1. Outside interface–>DHCP
  2. Inside 192.168.1.0/24


    Client
  • windows xp client on the inside, -->DHCP from Router.

Configuration

  1. I configured inside interface with static IP
  2. outside interface using DHCP wich doesnt create any default route.
  3. Src NAT, with WAN as outside and using action masquerade.
  4. winXP client can now reach Internet from inside.

Now starting with PPTP configuration
4. Static route to VPN-service(were tunnel is terminated).
5. Configure PPTP-client.

  • it connects to the VPN service -->status connected
  1. Change Src NAT to use PPTP-interface as outside
  2. Client has no internet access
    8 In routing-tabel I got a default route pointing at VPN-service 1.1.1.1 through the tunnel

90 seconds it seems that the tunnel reconnects, the status is always connected but I can see that the routes to the tunnel dissapear
No firewall rules exist (Only NAT)

Is there something more I must Add or change

Cheers

Liam

2

try to add a route to your VPN server