Prism II & WDS problem

RouterOS General
1

Hi,

I have little problem with Prism II cards and setup WDS, I set both routers to corect parameters (I tested 2 routers on distance about 5 meter !) and check manual. My problem is 1st router only sends packet to 2nd but not receive and 2nd router only receive packet from 1st router but no transmit ! (checked in winbox/interface/ap table traffic).

Any idea what is wrong ? (old version without WDS work fine in ap_bridge mode with the same HW).

Thanks

/Tomi

2

which version are you using? maybe you should upgrade!