problem ERROR: Gateway Timeout

RouterOS Beginner Basics
1

hello
i have mikrotik 5.20 and i install on pc its work good and when i try login to 192.168.1.1 frist time its login normal but after some days i try login and can’t login and say this massage

ERROR: Gateway Timeout

While trying to retrieve the URL > http://192.168.1.1/> :

Connection timed out

Your cache administrator is webmaster.
Generated Thu, 10 Mar 2016 01:13:36 GMT by 192.168.1.1 (Mikrotik HttpProxy)

and when i ping too i get request time out
any idea to fix this problem

2

Try Winbox

3

try winbox how ?
i need login to my router adsl not mikrotik

4

It seems you have enabled web cache server , so exclude your ADSL modem’s IP address from cache in mikrotik

5

i already enable proxy and exlude ip address router to and still not login

6

it’s better to send your router configuration here , specially firewall and proxy settings

7

ok No problem but sorry about that how i can configuration this firewall and proxy

use terminal and print ?

8

this firewall

/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
    tcp-close-wait-timeout=10s tcp-established-timeout=1d \
    tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
    tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \
    tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s
/ip firewall filter
add action=passthrough chain=unused-hs-chain comment=\
    "place hotspot rules here" disabled=yes
/ip firewall nat
add action=passthrough chain=unused-hs-chain comment=\
    "place hotspot rules here" disabled=no to-addresses=0.0.0.0
add action=masquerade chain=srcnat disabled=no out-interface=ether1
add action=masquerade chain=srcnat disabled=no src-address=10.0.0.0/24
add action=redirect chain=dstnat disabled=no dst-port=80 protocol=tcp \
    to-ports=8080
add action=masquerade chain=srcnat comment="masquerade hotspot network" \
    disabled=yes src-address=10.0.0.0/24 to-addresses=0.0.0.0
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061 sip-direct-media=yes
set pptp disabled=no
9

and this proxy

                enabled: yes
             src-address: 192.168.1.1
                    port: 8080
            parent-proxy: 0.0.0.0
       parent-proxy-port: 0
     cache-administrator: webmaster
          max-cache-size: none
           cache-on-disk: no
  max-client-connections: 600
  max-server-connections: 600
          max-fresh-time: 3d
   serialize-connections: yes
       always-from-cache: no
          cache-hit-dscp: 4
             cache-drive: primary-slave
10

Your ADSL ip is 192.168.1.1 and then you’ve set your web proxy src-address to 192.168.1.1 !!

disable your entire web proxy and check if your ADSL modem is reachable

also let web-proxy src-address to be blank , router will use the best in its routing table

http://wiki.mikrotik.com/wiki/Manual:IP/Proxy

11

ok i do to that and still can’t login adsl modem

and before time i set this configuration and work good and i take backup and restore and work good but after 4 or some hours i get this problem

12

disable this and test again :
add action=redirect chain=dstnat disabled=no dst-port=80 protocol=tcp
to-ports=8080

it’s better to send your full configuration and tell us how your ADSL model connected to your router and with which interface

13

disable this and test again :
add action=redirect chain=dstnat disabled=no dst-port=80 protocol=tcp
to-ports=8080

it’s better to send your full configuration and tell us how your ADSL model connected to your router and with which interface

i disable this rule and test but still not work and how i can get full configuration ??
my ADSL modem connected by pppoe to my router

14

run export hide-sensitive in terminal

15

ok i will do it but if i need set new configuration u can tell me correct option ? or link can i learn from here ?

16

need to know what you gonna do ?
draw your network diagram visually with some software like visio and post it here

17

need to know what you gonna do ?
draw your network diagram visually with some software like visio and post it here

ok i need make new set for my mikrotik all configruation
i need configruation my mikrotik simple configruation trafic log in from router to mikriotik to network

i work by hostspot
so i need correct setting to hotspot /routers /firewwall / DCHP client / web proxy / address