Problem initialize/establish WDS Interface

RouterOS Wireless Networking
1

Hi,

I have the following Problem:

I used the following HowTo (http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks) with two RB433AH. I tried it several times with this HowTo on different Routers (all RB433AH). Sometimes the WDS Link is createt and sometimes it is not. I have reset the systemconfiguration and I did every time the same to set up the WDS according to the HowTo.

Has anyone experienced the same problems or does anybody has a hint for me? If you need any more information just tell me…


thx in advance

greetings Pagani

2

I cant spend too many words cause I write with my phone:

TRY:

in both boards:
Mode apbridge or bridge
Same ssid
Wds static and ignore ssid
Create wds interfaces with the mac of the other wlan (in the other board..)
In wireless uncheck default autenticate
In wireless access list add mac of the other board
In connect list add the mac of the other board and click on connect=yes
Make abridge and put in ether1 port and wds port
Put a ip (same range in both boards) to ether1.

Pingggg!