Problem to get the trafic throw on a ric/522 point to point

RouterOS Wireless Networking
1

i have configured the “base” as bridge on the network card and a bridge in bridge config.
the client are configured as station and a bridge configured on the interfaces.

after that im able to ping ut to internet from the client router but not from the client behind the router!!!

a can access both the routers but not the client behind the client router.

any sugestion to that i have missed out

2

Im still learning MK too but is sounds like you have to add in WDS. To get my first P2P running I used AP-bridge, Station WDS. add WDS to both bridges (along with your RF card and eth port) You should then see trafic flowing between all “4” connections on each router. Hope this helps

Erik