Hi,
We have some bandwith control problem on the ver 3 software on a radio basestation.
The software do not limit the bandwith on a specific ip.
Is this a bug, or is it other ways to setup this in ver3?
Please look here for the configuration setup we use
Example on the ver3.3 where the rule not works
1 name=“cust1” dst-address=85.252.330.150/32 interface=all parent=none direction=both
priority=8 queue=default-small/default-small limit-at=600000/2100000 max-limit=600000/2100000
total-queue=default-small
Example on the ver2.9.38 where the rule works
15 name=“cust1” dst-address=85.252.330.150/32 interface=all
parent=none direction=both priority=8 queue=default-small/default-small
limit-at=600000/2100000 max-limit=600000/2100000
total-queue=default-small