Problem with merging 8 WAN ?

RouterOS General
1

Hi Everyone

i cannot merging 8 Wan
i have 10 Ethernet & 2 ISP

the first ISP give me 8 IP Addresses (the one IP = 512kb)
192.168.1.2/24
192.168.2.2/24
192.168.3.2/24
192.168.4.2/24
192.168.5.2/24
192.168.6.2/24
192.168.7.2/24
192.168.8.2/24
and i tested the ((NTH load balancing with masquerade)) and dont work i get 512kb only & i want 4098kb User Pass qqq1 1234 qqq2 1234 qqq3 1234 qqq4 1234 qqq5 1234 qqq6 1234 qqq7 1234 qqq8 1234 the Second ISP give me 8 PPPoE Users (the one User = 1024kb) and i tested the ((( PCC Load Balancer ))) and dont work
i get 1024kb only & i want 8192kb

Plz Help me
thanks

2

ask your isp if they support MLPPP, or line bonding, that’s the neatest way, further you have to try ecmpr and so forth, but getting it to work properly is hard. There is a few load balancing manuals around, the ebst by far is if you can have equipment at your isp, then you have many more options.

3

I ask my First ISP and he not support line bonding and dont accept for support line bonding\ \ I ask my Second ISP and he not support MLPPP and dont accept for support MLPPP

and they reject because save them bandwidth and if there found any way for merging 8 WAN from ISP1 or ISP2

note: this 2 ISP give me a different speed for each time >>> example for this

12 am to 8 am 2048 kb/s
8 am to 4 pm 1024 kb/s
4 pm to 12 pm 512 kb/s

thank you CyberT

4

so you have 2 isp’s?

bonding across both is going to be a problem if you want pure rate, aka
8x1mb = 8mb

what i can recommend trying is nth type with a download manager, that’s prity much the closest, but then you have to track secure connections or you will have trouble, that way your chance of having a few tcp session over each line, that should allow you to get closer to peer rate,

otherwise you have the usual, splitting ips over different lines with routing tables, and so forth.