Problem with PCQ+Simple queue configuration.

RouterOS General
1

I have config like this: http://wiki.mikrotik.com/wiki/PCQ_Examples with 10 different groups of users with different bandwith.

One of routers have about 120 active users the same time. Bandwith is about 11Mbit/s. All working fine!

Second routers have about 200 active users the same time. Bandwith is about 20Mbit/s. Packet loss ~1-2%!

Third router have about 330 active users the same time. Bandwith is about 29Mbit/s. Packet loss is about 8%. CPU load on every router is not more than 45%. Where is the problem???

With old configuration (every user have one queue) all working fine! Packet loss not more than 1/1000

RouterOS 2.9.17

2

AFAIK, shaping queues are supposed to drop packets.

Eugene

3

Hello,

Is the simple-queue(every user have one queue) is working with 100-120 wireless clients, in a RB with 4 mPCI?

I’m not satisfied with simple-queue in my RB, how can I change to PCQ-tree but to see/change every clients bandwith separatly?

thanks
ronniee

4

It’s not possible to see every client trafic using PCQ.