Problem with RouterBoard 532 & microtik

RouterOS General
1

hello!

/at first sorry of my poor English/

today I’ve got this new AP [topic..], i configured it, and it was working fine while in a few minutes later the winbox connection was aborted.
I reseted the AP, but there are some mistakes with default settings..
the NIC of my PC is working, I tested it. On a router no ping replies, and the MikroTik Neighbor Viewer says, the router has no ethernet connection. IP 0.0.0.0
a page, what I’ve made while it was working, is still available via wi-fi.
I’m using MicroTik version of 2.9.27
any idea?

2

Can you use winbox to connect to the mac address?

I find winbox and mac address somtimes dont work if you have secure mode on and/or 2 network cards

I am sorry if I did not understand your question, dont give up, ask again :slight_smile:

3

Can you use winbox to connect to the mac address?
I find winbox and mac address somtimes dont work if you have secure mode on and/or 2 network cards

haha, it’s working. the problem was 2 active network cards i have. thanks! :smiley:

4

To use MAC-Winbox (accessing Winbox via MAC-address), PC and workstation should be on the same network or broadcast domain.
If your PC and router connected to the same network, do you get any output from Winbox Neighbor discovery, pushing … button ?