Problems replacing an AP RBM11G with L11UG-5HaxD WISP

RouterOS Wireless Networking
1

When replacing the AP Wisp, I have issues. It AP connects with 3 clients.

One client connects normally, the other two clients don’t connect.

The client that connects normally is in standard CPE Station mode.

The two that don’t connect are in Bridge Station mode, and in this bridge, there are EOIP connections.

Could upload the RSC files… but would need to debug them to hide information.

Currently it’s working fine, but when replacing the AP, two clients don’t connect. However, if I change the wireless mode of the two clients to Station (not bridge station), they do connect. But it doesn’t serve my current bridge setup

Please help, I’ve initiated a support ticket with MikroTik but haven’t received a response. This post has been translated by ChatGPT

2

I just read in another post that if you connect an old controller with a new one, you have to use a pseudobridge (what a shame). I will try this solution.

A second solution would be to send the EOIP tunnel through the connection without including a wireless interface on the bridge. But I don’t know how to implement it if the target device is behind the CPE’s NAT.

Any opinion about it?