# Problems with VPN

**URL:** <https://forum.mikrotik.com/t/problems-with-vpn/28324>\
**Category:** General\
**Created:** [May 7, 2009, 5:35am UTC](https://forum.mikrotik.com/t/problems-with-vpn/28324 "2009-05-07T05:35:16Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![rpress](https://forum.mikrotik.com/letter_avatar/rpress/32/6_449c533f586939b6e5f246632a46421f.png) [@rpress](https://forum.mikrotik.com/u/rpress)\
**Post date:** [May 7, 2009, 5:35am UTC](https://forum.mikrotik.com/t/problems-with-vpn/28324/1 "2009-05-07T05:35:16Z")

</div>

I am trying to get a MT-MT VPN working but I ran into some snags.

1. I first tried to set up a L2TP VPN. After configuring it all it still did not work so I used the packet sniffer. What I saw was that the client was sending connect data (normal) but the server would respond on another of the public IPs. It would not respond on the same IP that it received the connect request. If I disabled the public IP on the server it would just pick another. For testing, I changed the client IP to the one the server had picked and the connection was established. I tried setting the local IP in the profile and in secret but it had no effect. I only have srcnat and no masquerede. What is wrong?

2. I removed the L2TP and then tried a OVPN connection. I could get it to connect but it would immediately disconnect. On the server using WinBox I could see the OVPN connection being created in the PPP-\>interface window and then it would disappear, over and over. It would happen so fast, but you could see it flickering.

Thanks for any help. The MT box is otherwise working great and I’d like to get a MT-MT VPN going.

---

_[View the full topic](https://forum.mikrotik.com/t/problems-with-vpn/28324)._
