Hi,
i have a PPPoE Server on the Cloud and Public IP.
also there is a MIkrotik in Office connected to Internet with 200 Mbits , there is a L2tP Tunnel between Server and Office mikrotik.
Clients connected to Mikrotik in Office Over wireless.
each one is connected to PPPoE Server to get Public IP so here the PPPoE Server go Over L2tp .
if i configure L2tp with 1450 MTU i can get 180 Mbits over the Tunnel to give my Clients
but some Clients have Internet Problem with some Websites.
if i configure L2tp with 1500 MTU , then Clients have no Problem but bandwith with be between 40 Mbits and 80 Mbits.
so im planing to make PPPoE Server in the Office that Connection go directly from MIkrotik to Clients no Tunnel no PPPoE Over Tunnel.
but how can i still give my Clients the Public IP Address ??
if there is a way to transport only IP Addresse over Tunnel to Customer but not the internet Traffic over Tunnel.
thank you
No one!! What i Need is how to make pppoe Server on one mikrotik but Public IP for the customers comes from other mikrotik over Tunnel to customers !
Gesendet von iPhone mit Tapatalk
Put Public ip’srange in pppoe profile for remote address
Sent from my SM-N920T using Tapatalk
Helo Thank you for answer,
Well i know very well how to Build pppoe Server and give ip out to customers as wan ip.
But im speaking about Public ip a real ip were is from Every were in the world to Ping .
Like 212.33.x.x ip .
If i have My mikrotik in Cloud as pppoe Server i Get it to work with Tunnel it to Office mikrotik but if i want to Get pppoe in Office as pppoe Server but ip for customers wan comes from cloud Router Not from pppoe Server .!
Thnx
Gesendet von iPhone mit Tapatalk