Heads-Up … FYI
info…
The 207.32.195.2 btest server for public Mikrotik admin use has been on-line since January 2016
During the last two years, I estimate it has performed somewhere between 1/4 million to 2 million btest(s).
The current average systained bandwidth is about 30 meg , which also includes those btest(s) that peak over 3-Gig and sustain 512-Meg and the btest(s) that run less than 1-Meg.
Todays btest server changes…
Because my ISP business is growing and always adding new high-speed Internet customers (3-Meg to 512-Meg accounts), I now need to reduce the amount of bandwidth I have been donating to the 207.32.195.2 btest project , so that I can keep a reserve burstable bandwidth capacity for all my customers , and not saturate my up-stream Internet feeds.
The 207.32.195.2 bandwidth limiters (simple queue) are now set at the following:
Target: ether1 (the CHR ether1 interface with IP address 207.32.195.2)
(Simple Queue , Target Upload & Target Download)
Max Limit: 105M
Burst Limit: 1250M
Burst Threshold: 50M
Burst Time: 500
The simple queue operates this way:
#1; allow sustained btest of 105-Meg
#2; If the recent bandwidth average has been below 50-Meg for (Burst-Time seconds), then allow up to 1.25-Gig (untill this this #2 line no longer is valid).
Thus , if nobody has very recently (or currently) used the btest server, then you should be able to btest up to 1.25-Gig for a short duration then auto-fall back down to 105-Meg.
If more than one person is using the 207.32.195.2 btest server at the same time, then the bandwidth limitations apply to all btesters combined. Thus if 10 users are using it at the same time, your results might be 1/10th the results you might of been expecting.
Also - keep in mind that the btest server often places a block on your IP which makes you wait for a period of time until you can continue btesting. This is done to help prevent the btest campers to start a btest and never stop their btest.
I hope to keep the 207.32.195.2 btest server on-line for many more years to come (providing I always have available bandwidth).
I/we would welcome anybody to also place their one btest server on-line for public access.
It could be a max of 10 meg or 100 meg or 1-Gig or even a 10-Gig. I am sure the community would be thankfull for any additional btest servers (especially in different locations throughout the world).
North Idaho Tom Jones