So I’m sure this is a very basic thing here, but I can’t seem to get it right(or so it seems).
I was using an EdgeMax Pro router for my main router, and just switched to a CCR1036 yesterday.
Since then(haven’t heard from any customers but at my house having issues) I’ve been having issues with my internet. Websites won’t load right or not at all, gotta reload them several times to get them to come up right. Few other connectivity issues I’ve noticed since the switch. Now the only thing I’m not real sure about in my config is this part… I have it set up as a DHCP server with a /25 of Publics that get handed to customer routers. I don’t know how the EdgeMax handled those to pass them through.
I got a /30 from my ISP and that’s on the WAN, I put the .1 from my /24 for the LAN IP. I have a NAT rule now that says /IP firewall nat add action=accept chain=scrnat dst-address=(public from ISP’ /30 on WAN) src-address=(customer public IP block)
I’m not sure that’s the best way to do it, and I don’t know if that’s affecting my connectivity, but I’m open to advice. Thanks!