Queue always disabled and CPU utilization at 50% at no load

RouterOS Beginner Basics
1

Dear All,

please note that, I have installed R0S 3.17 L-6 on a PC with C2D processor and 2 GB RAM. After the system was installed. WE are seeing the following.

  1. queues are always disabled and queue graphs is not showing.
  2. CPU utilization is 50% always irrespective of the load on the router. please note that the CPU count being displayed is 2.

Thanks in advance.
Sudipta
queue-pic4.JPG
queue-pic3.JPG
queue-pic4.JPG
queue-pic2.JPG

2

CPU utilization snapshot is here

–Sudipta
queue-pic5.JPG

3

change yout network card

4

From your images, the queue is not disabled. In the Advanced and Total tab, change “queue type” from “default-small” to “default”.

5

it doesnt matter if the queues are disabled or not in this configuration. CPU is 1999 MHZ with two simple queues CPU must be zero. Something else is wrong…