r there any prof.????

RouterOS Beginner Basics
1

Dear All,

I have some problem in ,y bridging network that show in the following pic:

2

If you want to make transparent network, you may use WDS to establish it,
http://wiki.mikrotik.com/wiki/Wireless_repeater

3

thanx Dear for your response..

I do this setting and there are problem in the setreaming of traffic, each 5 munite the switch of ISP restarting,

I think there are loop back in the some of point

anyone have any idea??

4

I’m not aware which interfaces you have bridged.
Enable rstp on MikroTik bridge, it will help you to cooperate with network loop.

Please, check careful bridge configuration.

5

Thanx dear for your help

i will explain:

the (1) RB433AH have the following confige

interface : ether1 (enable) and bridge1 and wlan1

bridge : STP and ports : ether1 and wlan1

wirless : mode:bridge band 5ghz freq 8150 wds dyanmic interface bridge1

ip address : x.x.x.x public ip have interface ether1


the last problem accur : if disable wlan1 the rb running else the public switch is restarting every 5 munite


thanx for all if there are any idea…