R52 Card defektive ???

RouterOS Wireless Networking
1

Hello MikroTik Forum,

i have a problem with a Mikrotik Bridge 2,4 GHz using R52 and 19dBi Antenna on booth sides.

I tried to turn the max power on 25dB (with winbox), i also turn power on, without a antenna on the MikroTik,
just the pigtail cable.


After 2 hr i turned the power of the card to default values… it works fine
2 weeks later, we tried the Turbo G mode (-82dBm, Troughput 12 M)
and after 5 hr working the MikroTik lost the connection.

After this we changed back to 2,4 B/G mode, but now the troughput is 30 -200 k and -90dBm

I think the card is defective …

Have you got an idee to ceck the card ??

2

Do you have signal loss on RX and TX or only on TX? R52 not support 25dBm output you just decrease your link bandwidth if you overload card.

3

If you want here is thegin to the MikroTik:

89.16.199.67

User: user
Password: user

Thank you

4

I am no think that card is broken RX/TX signal level is very close.What is 2,4GHz link distance? You need get -60 -70 signal level for good connection. Check Line-of-sight and equipiment ( pigtails, cables, antenna polarization ).

5

Hi,
the link was allready -72 - -75 dBm for over 2 weeks.

Then i changed to the 2,4 Ghz Turbo mode
The throughputh was very high.

After 6 hr of working, the link brocke down.

I changed to 2,4 B/G mode, the link go up
-90 dBm and 100k troughputh…

… i think i overclocked the card in the past