R52Hn Successful! Maximum Connected Client on 5Ghz a/n

RouterOS Wireless Networking
1

R52Hn! Maximum Connected Client on 5Ghz in a/n Mode

Please show us some good Config/ScreenShoot of your success fully maximum-connected client

also some R52Hn to R52Hn and R52Hn to R52H success fully connected links,

Some connectivity issue in N5Ghz to N5Ghz and N5Ghz to A5Ghz? which is better work for you?

your reply may helpful for others, successful

Thanks

2

same question here,

does anyone tested R52Hn + R5H as PtP?

orrr R52Hn @2.4ghz @AP-bridge mode? (PtMP)

and the last one: From what RouterOS does it works? 3.30 i think isn’t suitable or? have some rb333@work and do not want to upgrade them, becouse have no ones to replace @ exprement ))

3

R52Hn uses the Atheros 9220 chip set. It was first supported in ROS 4.3. The radio card will not be seen by older ROS versions such as 3.30.

Tom

4

I tested R52Hn as AP-Bridge mode for PtMP and Clients as Station-WDS on R52H and its works great for me
today i am going to test R52Hn as a Client of R52H @ 12-Klm

5

good! give us some results :slight_smile: I have found on russian boards, that R52Hn have strage signal noise, problems with it..

Jep, thanks! Found it in documentation.. Somewhere written that in newer versions RB333 wont work perfectly, isnt it?

6

The specs of this card looks great.
Even vor 11a 54MBit it has 9db better receive sensivity than R52.

So when I get usable connection at -85db with R52 I see same usability
with R52Hn at -94db ??

Anyone can confirm this in real life?

I would go out and replace all R52 in Accesspoints at once if this is true.