R52n-M Using both 2GHz and 5GHz bands

Hardware MikroTik hardware general
1

Hi All,

i have the following R52n-M in a RB411GL i was going to use this as a CAP access point but i done seem to be able to use both 2GHz and 5GHz bands do anyone have any suggestion on how to do this? im already doing this with dual radio devices.

https://mikrotik.com/product/R52NM

https://mikrotik.com/product/RB411GL

Thanks,

Aaron

2

You cannot use 2.4 and 5Ghz at the same time. Choose one or get a 2nd Card (you need a routerboard with 2 or more miniPCI card slots)… like this

https://mikrotik.com/product/RB433