rate limit in the server profile tab of the hotspot

RouterOS General
1

what is the use of rate limit in the server profile tab of the hotspot ?

2

Where exactely do you see this setting?
I checked the helppage, but it wasn’t mentioned:
https://help.mikrotik.com/docs/pages/viewpage.action?pageId=56459266

If it has to do with the wireless device:
https://help.mikrotik.com/docs/display/ROS/Wireless+Interface#WirelessInterface-BasicandMCSRatetable

3

I add limits but I don’t see any change

Please explain to me the usage?

Where exactely do you see this setting?
I checked the helppage, but it wasn’t mentioned:
https://help.mikrotik.com/docs/pages/viewpage.action?pageId=56459266

If it has to do with the wireless device:
https://help.mikrotik.com/docs/display/ROS/Wireless+Interface#WirelessInterface-BasicandMCSRatetable
[/quote]
23_hotspot_server_profile.png

4

Seems that the help page is not up to date yet, the wiki is:
https://wiki.mikrotik.com/wiki/Manual:IP/Hotspot/Profile


Rate limitation in form of rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst-threshold] [rx-burst-time[/tx-burst-time]]]] [priority] [rx-rate-min[/tx-rate-min]] from the point of view of the router (so “rx” is client upload, and “tx” is client download). All rates should be numbers with optional ‘k’ (1,000s) or ‘M’ (1,000,000s). If tx-rate is not specified, rx-rate is as tx-rate too. Same goes for tx-burst-rate and tx-burst-threshold and tx-burst-time. If both rx-burst-threshold and tx-burst-threshold are not specified (but burst-rate is specified), rx-rate and tx-rate is used as burst thresholds. If both rx-burst-time and tx-burst-time are not specified, 1s is used as default. rx-rate-min and tx-rate min are the values of limit-at properties

What version RouterOS are you running?

5

The version RouterOS are 6.49