Rate limits

RouterOS Beginner Basics
1

hi all

i have rate limit (rx/tx)=90k/144k

why users take more than 150k upload, not max 90k

many thx

2

Can you post your configuration?

3

laiman@Slaiman Server] /ppp profile> print
Flags: * - default

0 * name="default" use-compression=default use-vj-compression=default 
     use-encryption=yes only-one=default change-tcp-mss=no 

 1   name="112 Down   64 UP" local-address=182.10.0.1 
     remote-address=Normal Pool use-compression=no use-vj-compression=no 
     use-encryption=no only-one=yes change-tcp-mss=no 
     rate-limit=64k/112k 256k/256k 128k/128k 10/10 

 2   name="160 Down   80 UP" local-address=182.10.0.1 
     remote-address=No Firewall Pool use-compression=no use-vj-compression=no 
     use-encryption=no only-one=yes change-tcp-mss=no 
     rate-limit=80k/128k 256k/256k 128k/128k 10/10 

 3   name="220 Down   96 UP" local-address=182.11.0.1 
     remote-address=No Firewall Pool use-compression=no use-vj-compression=no 
     use-encryption=no only-one=yes change-tcp-mss=no rate-limit=96k/220k 

 4   name="180 Down   80 UP" local-address=182.11.0.1 
     remote-address=No Firewall Pool use-compression=no use-vj-compression=no 
     use-encryption=no only-one=yes change-tcp-mss=no 
     rate-limit=80k/140k 256k/256k 128k/128k 10/10
4

how did you check the speed while there is no remote address?

5

i looked at the Rx in ppp–> interface
most customer upload arrive >150 kb

6

set rate limit 90k/144k,

1 name=“112 Down 64 UP” local-address=182.10.0.1
remote-address=Normal Pool use-compression=no use-vj-compression=no
use-encryption=no only-one=yes change-tcp-mss=no
rate-limit=90k/144k

i’ve tried and it works for me.