RB 3011 Gb/s Throughput problem with bandwidth test

RouterOS Beginner Basics
1

Hi everyone,
I’m having this following problem with my RB 3011, testing the link from RB 3011 to my APs hAP ac2, i’m not reaching the gigabit speed. If i test with bandwidth test, I have close to Gb/s in Download from hAP ac2 to RB 3011 but I can’t reach more than 500Mb/s in upload from RB 3011 to hAP ac2.

If I test the bandwidth from two APs connected through RB 3011 switch, I can reach full gigabit transfer rate.

Could someone help me with this problem?

2

problem is that the bandwidth test generator is single threaded at this time and can’t create enough throughput. It is the recommendation of MT to not test on the infra itself but THROUGH the component, so no additional load.

And you confirmed this as ac2->3011->ac2 can sustain 1gb.

3

Thanks a lot for your help, I’m sure that’s the problem! So this would not be a problem with the general performance of the network.