I just setup a rb433 to be added to my network. I am getting slow response and page not found errors loading web pages. The only site that loads fast and doesn’t time out is Mikrotik’s. Yahoo mail won’t load, gmail loads but takes forever 5 to 7 min. Has anyone else had this problem? I have some rb112’s in my network and they run way faster and have no problem with yahoo or google. 
what configuration have you set up there?
It has 2 wireless cards a cm9 and a compex 54bg. the compex is the access point and the cm9 is a backhaul at 5ghz. I used torch to view the traffic and it starts to access the dns and the ip of the site it transfers some data then just stops. I have a routed system with the traffic from the ap forwarded to the backhaul. The ethernet is not connected except for poe. The version is 2.9.
I thought the new boards wouldnt run on Ver 2.9.X Rb333 for example… ?? 
-Jordan
P>S sorry for getting off topic…
The compex seems to work fine as I stay connected to it and winbox is connecting to the AP. It seems to pass other traffic as I use putty through it to conect to a staros box and it connected and didn’t drop the connection until I disconnected.
Sorry I didn’t get your post correctly, I was in a hurry when I replied. I just assumed it was 2.9 It may be 3.0. I will check on it when I get back to the shop.
I tried enabling the ethernet and using it as the gateway interface and the problem is the same. Very slow page loads and random unable to connect errors. I have attached the version info for all installed packages. Any help would be appreciated.
Dave
rb433 package version.odt (8.51 KB)
The problem is solved. I made a mistake in the default route. Not used to this gui yet, I should have stuck to the terminal interface.
Thanks Dave 