Hey there!
I’ve configurated my 433UL to access net via LTE connection with modem E3272, I can see my LTE at interface list and I’ve set up user password PIN etc. however i can not access the ethernet nor modem in browser URL adress.
I use RouterOS 6.12 whilst it is said MT support LTE since ver 6.8.
Previously it was running well as I’ve downgraded my routerOS and E3272 was detected in USB port and configurated PPP connection.
Any tips how to run the net as a LTE interface?
add a dhcp-client on the lte1 interface, enable the masquerading rule on lte1 and access the dhcp server gateway IP.
Thank you for fast reply.
Now I’d like to ask another question:
Everytime I pull out my LTE modem it gets it’s settings in LTE interface erased and it doesnt permit internet access untill i re-enter it in modem interface.
Do you think i may prevent this from happening?
Best regards.
unlock the PIN on your SIM card and then you will not need to access that page to enter the PIN.
I have similar modem but on RB951Ui
sometimes everything work perfect, but sometimes strange, when I am on one place and turning on router always router found the LTE interface, but when I go to difrent place modem all time flashing blue light and no inicializing LTE interface, few reboots and start to work, but the bigest problem is I cant nothing monitor and get reason why LTE interface is not inicializing.
second, why when I have LTE interface inicialized, and working propertly why I cant get INFO:
[admin@MT Meza] /interface lte> print
Flags: X - disabled, R - running
0 R name=“lte1” mtu=1500 mac-address=58:2C:80:13:92:63
[admin@MT Meza] /interface lte> info lte1
failure: Modem does not have serial interface!