RB Power consumtion on routerboard.com

Hardware MikroTik hardware general
1

It is possible add power consumtion on routerboard.com ?

Now I need know power consumtion for CRS125.
Brochure - no info
Quick Quide - no info
routerboard.com - no info

Only forum know power consumption - http://forum.mikrotik.com/t/crs-switch-hows-it-coming/68102/14

Please add this important info on routerboard.com
Thanks

EDITED:
CRS125 - Maximum power usage, with fully loaded ports → 15W with no Wireless, 18W with wireless (at maximum tx power). In normal operation it will be much less, around half that, depending on number of used ports etc
CCR1036 (Running Idle) consumption is 28W on average (with LCD off), MAX consumption CCR1036 is 60W
CCR1016 (Running Idle) consumption is 17W on average (with LCD off), MAX consumption of CCR1016 is up to 38W

2

Nobody needs to know the power consumption of RouterBoards?

I think it would be useful info on www.routerboard.com

3

+1
Required info

4

Power consumption of routerboard would be handy for general calculations but on sites I use inline current and voltage + wattage meter, this way I can calculate accurately the uptime of battery banks,

5

We have added “Max Power consumption” to our specification tables, for example: http://routerboard.com/RB750

6

Also, please note that by “maximum” we really mean it. It will not be that easy to achieve that level for actual deployment of the router.

7

Could you indicate consumption in the state - running iddle ?
Real consumption is somewhere between “running iddle” and MAX.

I will try to gradually add RB in the table → first post

8

Running idle is too hard to define. What is running idle for SXT? is the wireless interface enabled, or disabled? it is connected, or scanning? is it in AP or CPE mode?