I would like to deploy the following configuration
WAN1 (WiMAX) ----EthBypass On - RB1100 #1
WAN2 (Cable Modem) -EthBypass On— RB1100 #2
Should RB1100 #1 goes poof, RB 1100 #2 takes over both local WiMAX and Cable Modem of RB1100 #2
Should RB1100 #2 goes poof, RB1100 #1 takes over local cable modem and WIMAX on RB1100 #1
RB1100 #1 and RB1100 #2 do SSL VPN load balancing and WAN load sharing, with a SIP PROXies running on METAROUTER on both hardware
SIP Phones would go out WiMAX in priority and download go over cable modem in priority.
I plan to install both RB1100 to replace Cisco ASA with legacy IPSEC and no support for redirecting SIP trunk to teleworker with IP Phone.
I would like to have an opinion as to the expected throughput for SSL VPN with this configuration given that RB1100 does not have hardware acceleration.
I am also able to get a very good quality SIP STACK vendor to port their stack to METAROUTER.
Is there documentation on how to cross-compile for RB1100 ?
Is there anyone who want to build this for our company ?
We would standardize on this configuration for SIP TRUNK demarcation.
fmenard@xittel.net
819 601 6633