RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Hardware MikroTik hardware general
1

on web http://routerboard.com/RB1100AHx2
Supported input voltage 10 V - 28 V
But
•User Guide
http://i.mt.lv/routerboard/files/rb1100ug.pdf
12-­‐24VDC;PoE on Ether13: 12-­‐24VDC
so work or NO with 27Vdc?

I want to connect to

Mean Well AD-155B specifications: AC-DC Enclosed power supply with UPS function; with Output 27.2Vdc
but already connected to port number 13 and now the port is unresponsive
I want to try connecting it directly to J11power connector,

but no longer responds as my first port 13, I want to get some confirmation if you can work with 27Vdc?
Thanking you in advance for any collaboration

2

In my case of CCR1009-8G-1S-1S+PC

http://routerboard.com/CCR1009-8G-1S-1SplusPC

Supported input voltage 14 V - 57 V

On the box:

http://img.routerboard.com/mimg/1002_hi_res.png

18 - 56V

Actually works 13.5V

But in this case Health show 0.0V. In case power supply 24V - Health show 12.8V :slight_smile:

3

helectro how are you connecting to port 13?

4

Hello. Adav, pukkita thank you very much for your attention

Multi port passive POE
http://www.ebay.com/itm/Multi-port-passive-POE-power-injector-for-8x-Ubiquiti-OpenMesh-Mikrotik-Tranzeo-/221738905598?pt=LH_DefaultDomain_0&hash=item33a0ab2ffe

on port 13 the green LED is always on, and does not appear like interface

5

That’s a 100BaseT injector, does that ether13 light-up led stays lit even after a reset?

6

I put a jack to have a second entrance, and a direct plug to connect the power supply with UPS meanwell 27 V.

since the port 13 but never worked again, no link does not turn on the router

I have the suspicion that accepted the 27 V?

and not just for a whim, it is because I am running a UPS with all devices and up to now worked as a jewel, but I want to change the current router (rb1200) this