RB1100ahx2

RouterOS Beginner Basics
1

Hello,
What is the right way to make one 10 ports switch from RB1100? I think to include ports 5 and 10 in the bridge. Some ports should be multi VLANs (trunk port) and some should be single VLAN (access port). And I have to connect L2 part to L3 part on every VLAN.
Questions:

  1. Will it work?
  2. Are ports 1-5 (6-10) in the switch by default or I have to include them in the Bridge or make some of them as slaves for a one?
  3. Which port to use in order to attach VLANs for IP part? Bridge or port 5 or 10?
  4. Can I use ports 5 and 10 (when they are in the bridge) for L3 level (in firewall rules for example)?
  5. Can I use ports 5 and 10 (when they are in the bridge) for L2 level (to connect there cables)?
  6. What to do with ports 11-13? How to bridge multiple VLANs from them to ports 3 or 7?
2

If you need to use all 10 ports in one group it would be best to use bridge. Here is an example that covers simple VLAN trunking with bridge: http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment