I have an RB1100x2 at one of our towers with the Internet feed on port 1 thru 2 PowerStation5’s working as a dedicated backhaul. Ports 2 thru 10 feed various access points on our tower. The problem is if I lose a connection from my PowerStation5’s for some reason, usually a loss of power, when they come back up I get no Internet traffic passed on port one. From my Dude server all my users and access points are red. My PowerStation5’s and RB1100x2 show green. I can log into anything that is green but not red. To get the Internet traffic to start passing again I have to power my RB1100x2 on and off a couple of times. My PowerStation5’s are current on their firmware. My RB1100x2 is running v5.26. The signal on my PowerStation5’s is -65dbm with a 100% CCQ (only a three mile line of sight jump). I have reset the RB1100x2 to factory defaults and reprogrammed. Not sure what to do at this point. Every now and then when I power cycle the RB1100x2 it will work for a short time then stop passing Internet traffic. This unit is less than 6 months old. When it works it works great. Not sure what to do at this point. Has anyone seen this behavior before or have any ideas on how to fix it. I feel it might possibly be a setting not quite right but again am not sure where to look. Any help would be greatly appreciated.
Change Ubiquity devices to others more serious.